Loctite 1366072 Manuel d'utilisation et d'entretien télécharger pdf

EPOXY

Highest Strength Two-Part Adhesive for Surfaces with Gaps and Voids

SYRINGE APPLICATORS

Bonds virtually all rigid materials. Select from the substrate-speciﬁc

formulas engineered to deliver the best results in specialty applications.

PREPARATION

Clean and dry surfaces, ensure they are free from grease, dust, oil, wax and paint.

Lightly roughen up or sand the surfaces to be bonded. Remember to protect the work surface.

APPLICATION

Specialty applicator "Self Mixing Syringe" mixes as it dispenses. Equal-parts hardener

and resin are dispensed and must be mixed thoroughly to properly activate the chemical bond.

Apply to both substrates to be bonded.

REMOVAL FROM SKIN

If skin is stuck together, soak in warm soapy water then gently roll skin apart.

To remove from skin surface, rub skin with cooking oil.

REMOVAL FROM FABRIC

Cured adhesive cannot be removed from clothing and is not soluble in any solvent.

REMOVAL FROM SURFACES

Cured adhesive may be cut away with caution. Cutting, however, could damage the surfaces.

Prolonged immersion in paint stripper will soften the cured adhesive to aid removal, but may

damage the surface.

EPOXYHighest Strength Two-Part Adhesive for Surfaces with Gaps and VoidsSYRINGE APPLICATORSBonds virtually all rigid materials. Select from the subst

Pas de commentaire

Loctite 1366072 Manuel d'utilisation et d'entretien